S Dome 10° System

Patent Pending

 

The S Dome system is suitable for nearly all types of flat roofs.

  • A system for structurally challenging roofs with limited ballasting options
  • Reliable system for all roof conditions
  • Aerodynamically optimised and tested in wind tunnel
  • Quick and easy handling and installation – adapted to the workflows on a construction site
  • UL 2703 Listed for bonding and fire

  • Symbol flat roof
  • Symbol one-sided elevation
  • Symbol pallets ware

Product details

Components

Project Images

Downloads

Are you planning a photovoltaic system? Please use our inquiry form or contact us directly for further assistance.

Document Type
Assembly Instructions
S Dome Assembly Instructions US9-0716
Certificate of Compliance
S Dome UL 2703 Certificate of Compliance US01-0415
Technical Sheet
S Dome Technical Sheet US1-0916

Videos

Approved Modules - Flat Roof System

Our flat roof systems require corner clamping on the modules. On the link "approved modules" you will find a list of all compatible modules. 

If your module is missing in the list, please call us at +1.760.301.5300 or write an e-mail info@everest-systems.com.

Technical Data

Side view S-Dome system
 
S Dome 10° System
Scope of application

Flat roofs up to 5° with membrane and bitumen covering or concrete

Fastening type/roof fixture

Ballasted with no penetrations; anchors are optional

Requirements

  • Permissible module dimensions (L x W x H): 1550 - 2000 x 950 -1100 x 30 - 50 mm
  • Minimum system size: one row x 3 modules
  • Roof inclination of up to 5°
Technical specifications

  • Thermal separation after max. 2.5in at maximum 50 foot intervals
  • Modules and mounting system are assembled simultaneously
Inclination angle

10°

Material

  • Mounting rails, S Dome, Dome SD, Windbreaker, module clamps, rail connectors: Aluminium EN AW-6063 T66
  • Building protection mats: PUR-bound rubber granules
  • Small parts: Stainless steel (1.4301) A2-70
S Dome 10° System
Scope of application

Flat roofs up to 5° with membrane and bitumen covering or concrete

Fastening type/roof fixture

Ballasted with no penetrations; anchors are optional

Requirements

  • Permissible module dimensions (L x W x H): 1550 - 2000 x 950 -1100 x 30 - 50 mm
  • Minimum system size: one row x 3 modules
  • Roof inclination of up to 5°
Technical specifications

  • Thermal separation after max. 2.5in at maximum 50 foot intervals
  • Modules and mounting system are assembled simultaneously
Inclination angle

10°

Material

  • Mounting rails, S Dome, Dome SD, Windbreaker, module clamps, rail connectors: Aluminium EN AW-6063 T66
  • Building protection mats: PUR-bound rubber granules
  • Small parts: Stainless steel (1.4301) A2-70